Screen Printing Plate Washing Booth<\/strong>, It was developed for cleaning printing plates, removing paint residue, and performing emulsion removal processes in a more controlled area. With its external dimensions of 125x80x180 cm, it is aimed at workshops that require a large working area.<\/p>\n The exterior is made of oven-painted steel, and the interior work surface is made of galvanized sheet metal. Four braked swivel casters help to move the cabin when needed and to fix it in the working position. Water plumbing is planned to be ready for use. The lower section has a cabinet; a production option without a cabinet can be discussed if required.<\/p>\n The booth should be installed in a well-ventilated area with access to a clean water line and a suitable drainage system. The wheel brakes must be engaged during operation; the outer dimensions of the molds to be used should be compared with the booth's working area.<\/p>\n Screen Printing Plate Washing Booth<\/strong> This is not a chemical treatment system. Paint remover and emulsion remover products should only be used according to the manufacturer's instructions; waste liquids should not be discharged directly into the environment and should be managed according to relevant regulations.<\/p>\n\n\n
\n External dimensions<\/th>\n 125x80x180 cm<\/td>\n<\/tr>\n \n Outer casing<\/th>\n Oven-painted steel<\/td>\n<\/tr>\n \n Inner surface<\/th>\n Galvanized sheet metal<\/td>\n<\/tr>\n \n Wheel<\/th>\n 4 swivel wheels with brakes<\/td>\n<\/tr>\n \n Installation<\/th>\n Water supply is ready.<\/td>\n<\/tr>\n \n Subsection<\/th>\n With cabinets; without cabinets available upon request.<\/td>\n<\/tr>\n \n Production<\/th>\n T\u00fcrkiye<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n Correct positioning in the workshop<\/h3>\n
Related product groups<\/h3>\n